Processor Accessories
RR2166 6-Way Splitter
Click Here For Full Product Information This item ships Canada Post Only.
$228.50
In stock in Mannville
Last oneEmergency Stop Switch
Emergency stop switch for Range Road firewood processors. Part RR2253.
$18.75
In stock in Mannville
Only 3 leftRR2521 Hydraulic Infeed Kit
Hydraulic infeed kit for the EcoPro series. Two chain-driven 12" rollers, control valve, hoses and fittings included.
$995
In stock in Mannville
Last oneRR503 5 Metre Stand-Alone Conveyor
5 metre chain and paddle conveyor with its own 6.5 HP engine. Runs independently of the processor.
$2,735
$273.50 deposit
In stock in Mannville
Save $449Only 2 leftClearance!! 3-Point Hitch Firewood Branch Logger & 45° Adjustable Belt Conveyor, 20-60 HP Tractor, PTO Driveline Shaft Included, TMG-TFL42
The TMG-TFL42 Firewood Branch Logger & Adjustable Belt Conveyor is suitable for use in a wide range of industries including forestry, firewood cutting, lumber mills, road maintenance, ya
$3,950$4,399
$395 deposit
In stock in Mannville
Pin for bar/chain adjuster block
Pin for the bar and chain adjuster block. Range Road part RR2225.
$7.75
In stock in Mannville
Last oneRR172 Electric Firewood Bundler
Electric firewood bundler with foot pedal operation. 1.0 cubic foot bundles, 15" - 24" firewood.
$1,235
$123.50 deposit
In stock in Mannville
Save $146Last oneRR102 Log Table with Hydraulic Infeed
58" - 70" width live deck with hydraulic advance and infeed. Chain driven, adjustable height and width.
$1,949$2,095
$194.90 deposit
In stock in Mannville
Last oneRR104 HD Live Deck Extension
Extension for the RR103 live deck. Mounts on either side, or both.
$1,073
$107.30 deposit
In stock in Mannville
RR170 Manual Firewood Bundler
Hand-crank firewood bundler. 1.0 cubic foot bundles, 15" - 24" firewood, wrap included.
$675
$67.50 deposit
In stock in Mannville
Last oneRR106 Log Lifter with Hydraulic Infeed
Log lifter with hydraulic infeed kit - picks the log off the ground and feeds it to the processor.
$1,795
$179.50 deposit
In stock in Mannville
Only 2 leftRR103 HD Log Table with Hydraulic Infeed
84" width heavy-duty live deck with hydraulic advance and infeed. Reinforced frame and heavy-duty rollers.
$3,060
$306 deposit
In stock in Mannville
Only 2 leftSaw Motor Seal Gen.3
Generation 3 saw motor seal. Seals differ by generation — choose by the colour of the one you are replacing. Part RR2215.
$19
In stock in Mannville
RR2143 Seal Saw Motor
Saw motor seal for generation 1 and 2 processors. Range Road part RR2143.
$12.75
In stock in Mannville
Only 3 left20" Chainsaw Bar
20" Chainsaw Bar Options: Standard Bar Oregon Aluminum Bar
$27.25
In stock in Mannville
Only 2 leftKey way for saw motor
Key way for the saw motor. Range Road part RR2226.
$5
In stock in Mannville
Hand Winch for EcoPro
Hand winch for the EcoPro firewood processor. Range Road part RR2245.
$186.30
Request to order
Pin for 6" Conveyor Roller
Pin for the 6" rubber conveyor roller. Range Road part RR2258.
$22.70
Request to order
Conveyor Rubber Drive Roller 6"
6" rubber conveyor roller. Range Road part RR2203.
$95.55
Request to order
RR2242 Roller Wheel
Drive Roller with chain sprocket. Drive Sprocket Body Width 388mm (15 5/16") Shaft Length 60mm (2 3/8") -Large end Shaft Length 44.5mm (1 3/8") -Sprocket side Shaft Diameter 25mm (1") Sprock
$118
Request to order
Drive Roller for 10" Conveyor
250 mm rubber drive roller for the 10" conveyor. Range Road part RR2259.
$113.50
Request to order
Ram/Splitter Valve RR20T RR27T
Ram and splitter valve for the RR20T and RR27T. Range Road part RR2208.
$127.75
Request to order
RR2192 1/2" coupler for log splitter
1/2" coupler for the log splitter. Range Road part RR2192.
$19.90
Request to order
Conveyor Belt Repair Lace
10" belt lacing for joining or repairing a conveyor belt. Sold individually; the lacing wire is not included. Part RR2256.
$8.20
Request to order
Saw Motor for EcoPro w/bypass
Saw motor for EcoPro processors fitted with a bypass. It will not fit a motor without one — check yours before ordering. Part RR2262.
$355
Request to order
Control Valve RR102 RR103
Control valve for the RR102 and RR103 log tables. Range Road part RR2229.
$251
Request to order
Conveyor Paddle 6"
6" paddle for the conveyor belt. Range Road part RR2214.
$5
Request to order
RR2147 1/2" quick coupler
1/2" hydraulic quick coupler. Range Road part RR2147.
$27.95
Request to order
RR2161 Hub Assembly EcoPro
Hub assembly for the EcoPro firewood processor. Part RR2161.
$64.80
Request to order
KOHLER Air Filter Housing 14hp
Air filter and housing for the 14 hp Kohler engine on the EcoPro. Part RR2224.
$95
Request to order
RR2182 ball valve for bar oil tank
Ball valve for the bar oil tank. Range Road part RR2182.
$13.50
Request to order
Recoil for Kohler 14hp
Recoil starter for the 14 hp Kohler engine. Range Road part RR2201.
$57.50
Request to order
RR2193 nut for RR120 RR7E
Nut for the RR120 and RR7E log splitters. Range Road part RR2193.
$11.35
Request to order
Seal Kit for RR270 Ram
Seal kit for the RR270 ram. Range Road part RR2205.
$75.75
Request to order
RR2171 sightglass RR20T
Hydraulic fluid sight glass for the RR20T firewood processor. Part RR2171.
$7.65
Request to order
RR2153 Recoil 10hp RATO
Recoil starter for the 10 hp Rato engine. Range Road part RR2153.
$44.65
Request to order
RR2150 fitting for lubricator block
Fitting for the lubricator block. Range Road part RR2150.
$4.50
Request to order
RR2137 Battery Terminal Set
Battery terminal set — terminals only, no cable. Range Road part RR2137.
$7
Request to order
RR2126 Conveyor Motor
Conveyor drive motor for Range Road firewood processors. Part RR2126.
$226.40
Request to order
RR2134 Manual Ram Actuator Arm
Manual ram actuator arm. Range Road part RR2134.
$39.20
Request to order
RR2272 Log Hold Down Spring EcoPro
Log hold-down spring for the EcoPro300 firewood processor. Part RR2272.
$4.70
Request to order
RR2140 Black Rubber Spyder
Black rubber spider coupling insert, L95. Range Road part RR2140.
$9.10
Request to order
RR2300 3/8" .063 Chisel Chainsaw Chain
3/8" .063 chisel chainsaw chain — a 100 foot roll with master links, enough to make up chains for a whole season. Part RR2300.
$358
Request to order
Replacement Belt
Replacement belt for RR502 Conveyor
$332.65
Request to order
Bar Chains
Oregon Chain Options: 18" Oregon Chain 72 Drive Links 20" Oregon Chain 76 Drive Links 20" Oregon Chain 78 Drive Links
$28.10
Request to order
RR2541 Chainsaw Hydraulic Bar Conversion Kit
Click Here For Full Product Information
$845
Request to order
Ram Actuator Cable
Ram actuator cable for Range Road firewood processors.
$19.95
Request to order
Conveyor Belt
Conveyor Belt - Choose Width
$213.85
Request to order
RR2167 Coupler L90 1"
L90 coupler, 1". Range Road part RR2167.
$12.20
Request to order
RR2152 Recoil 13hp
Recoil starter for the 13 hp engine. Range Road part RR2152.
$27.15
Request to order
RR510 7 Metre Stand-Alone Conveyor
7 metre chain and paddle conveyor with its own 6.5 HP engine. Folds for storage.
$3,280
$328 deposit
Request to order
RR2131 Conveyor shutoff valve
Shutoff valve for the conveyor. Range Road part RR2131.
$72.35
Request to order
RR2156 Saw Arm Return Spring
Saw arm return spring for Range Road firewood processors. Part RR2156.
$12
Request to order
Chain Drive Sprocket
Choose your options. RR2144 - fits all models without case drain on saw motors RR2264 - fits EcoPro300B w/case drain on saw motor
$29.90
Request to order
RR2141 hydraulic cap
Round plastic cap for the hydraulic tank. Range Road part RR2141.
$13.70
Request to order
RR2547 Saw Motor Upgrade Kit
Upgrade kit for Range Road fire wood processor motor. Choose swivel plate required to accompany kit.
$434.15
Request to order
RR2302 .325 .063 Chisel Chainsaw Chain
.325 .063 chisel chainsaw chain — a 100 foot roll with master links. Part RR2302.
$394.70
Request to order
RR2170 Hydraulic Oil Filler Assembly
Hydraulic Oil filler with screen and cap for all Range Road firewood processors
$34.30
Request to order
RR2146 3/8" quick coupler set
3/8" quick coupler set, male and female. Range Road part RR2146.
$26.35
Request to order
Grizzly Bar for Conveyor
Upgrade your conveyor with our Grizzly kits! Shipping available within Canada Only.
$125
Request to order
RR2195 conveyor infeed shaft coupler
Coupler for the conveyor infeed shaft. Range Road part RR2195.
$13.45
Request to order
RR2178 2 speed vavle RR20T
Two-speed valve for the RR20T firewood processor. Part RR2178.
$96
Request to order
RR2139 Coupler L90 25mm
L90 engine coupler, 25 mm. Range Road part RR2139.
$12.25
Request to order
RR2236 Saw Arm Return Cylinder
EcoPro saw arm return cylinder.
$33.40
Request to order
RR2149 Chain Adjustment Block
Chain adjusting block for Range Road RR20T and early EcoPro firewood processors. Bar oil hose mounts to this block.
$38.15
Request to order
EcoPro Conveyor Chain Conversion Kit
Convert your belt conveyor to chain. Contact a dealer to order. This kit is for the processors only and is not compatible with the RR502 Standalone Conveyor.
$377.85
Request to order
RR2170A Hydraulic Oil Filler Cap
Hydraulic Oil filler cap for all Range Road firewood processors
$14.50
Request to order
Fitting 1/2"M x 1/2"M 90°
1/2" male to 1/2" male 90° hydraulic fitting. Range Road part RR2196.
$10.50
Request to order
RR2187 Chain Adjustment Block - No Oil Hose
Chain adjusting block for Range Road EcoPro firewood processors. Bar oil hose mounts to the swivel plate NOT to this block.
$39
Request to order
RR3120 Firewood Bag
Our bags are meant for storing and transporting firewood. Simply slide the reinforced loops over your forklift forks and adjust your conveyor so your processed firewood goes directly into th
$25
Request to order
18" Chainsaw Bar
Options: 18" Range Road 18" Stihl
$23.50
Request to order
Hydraulic Pump Main EcoPro
Main hydraulic pump for the EcoPro firewood processor. Part RR2235.
$284
Request to order
RR2160 Conveyor Bearing
Conveyor bearing, UCFL204. Range Road part RR2160.
$18
Request to order
GET PRICING ON PROCESSOR ACCESSORIES
Leave a phone number and Tim will get you real numbers, lead times and freight.