Parts & accessories
PARTS
Blades, filters, knives, hitches and wear parts for the machines we sell. Tell us what you need and Tim confirms the price and the freight, or pick it up free in Mannville.
Last oneEmergency Stop Switch
Emergency stop switch for Range Road firewood processors. Part RR2253.
$18.75
In stock in Mannville
Last one162 1/2" x 1.5" Sawmill Blades
162 1/2" x 1.5" x 0.42" These blades fit our 36" Sawmill. Order a single blade, 3 pack, 5 pack or 10 pack.
$54
In stock in Mannville
174" x 1.5" x .042" Ripper37 Blades
Sawmill blades for our 60 Series RR6036 36" Sawmill Order a single blade, 3 pack, 5 pack or 10 pack.
$61
In stock in Mannville
Only 3 leftRR2521 Hydraulic Infeed Kit
Hydraulic infeed kit for the EcoPro series. Two chain-driven 12" rollers, control valve, hoses and fittings included.
$995
In stock in Mannville
Only 2 leftRR5265 Log Dog, Click Type
New style log dog/holder.
$53.25
In stock in Mannville
109.5" x 1.25" x .035" Sawmill Blades
10° sawmill blades are the most popular choice as they are considered an all-purpose blade and are suitable for sawing mixed hardwoods such as poplar, red oak, walnut, soft maple, and cherry
$33
In stock in Mannville
Pin for bar/chain adjuster block
Pin for the bar and chain adjuster block. Range Road part RR2225.
$7.75
In stock in Mannville
RR2166 6-Way Splitter
Click Here For Full Product Information This item ships Canada Post Only.
$228.50
In stock in Mannville
Only 2 leftSaw Motor Seal Gen.3
Generation 3 saw motor seal. Seals differ by generation — choose by the colour of the one you are replacing. Part RR2215.
$19
In stock in Mannville
RR2143 Seal Saw Motor
Saw motor seal for generation 1 and 2 processors. Range Road part RR2143.
$12.75
In stock in Mannville
Only 3 left20" Chainsaw Bar
20" Chainsaw Bar Options: Standard Bar Oregon Aluminum Bar
$27.25
In stock in Mannville
Only 2 leftKey way for saw motor
Key way for the saw motor. Range Road part RR2226.
$5
In stock in Mannville
Pin for 6" Conveyor Roller
Pin for the 6" rubber conveyor roller. Range Road part RR2258.
$22.70
Request to order
Conveyor Belt Repair Lace
10" belt lacing for joining or repairing a conveyor belt. Sold individually; the lacing wire is not included. Part RR2256.
$8.20
Request to order
Clutch for RR403 Wood Chipper
Replacement clutch for the RR403 wood chipper. Range Road part RR2219.
$103.10
Request to order
Saw Motor for EcoPro w/bypass
Saw motor for EcoPro processors fitted with a bypass. It will not fit a motor without one — check yours before ordering. Part RR2262.
$355
Request to order
Control Valve RR102 RR103
Control valve for the RR102 and RR103 log tables. Range Road part RR2229.
$251
Request to order
Conveyor Paddle 6"
6" paddle for the conveyor belt. Range Road part RR2214.
$5
Request to order
Hourmeter
Hour meter for Range Road equipment — keeps track of running hours so services land where they should. Part RR2248.
$13.50
Request to order
RR2147 1/2" quick coupler
1/2" hydraulic quick coupler. Range Road part RR2147.
$27.95
Request to order
RR2161 Hub Assembly EcoPro
Hub assembly for the EcoPro firewood processor. Part RR2161.
$64.80
Request to order
KOHLER Air Filter Housing 14hp
Air filter and housing for the 14 hp Kohler engine on the EcoPro. Part RR2224.
$95
Request to order
RR5050 Decal for gauge RR5026 & RR5029
Measuring Decal for RR5026 & RR5029 Sawmill
$5.05
Request to order
RR2182 ball valve for bar oil tank
Ball valve for the bar oil tank. Range Road part RR2182.
$13.50
Request to order
Recoil for Kohler 14hp
Recoil starter for the 14 hp Kohler engine. Range Road part RR2201.
$57.50
Request to order
RR2193 nut for RR120 RR7E
Nut for the RR120 and RR7E log splitters. Range Road part RR2193.
$11.35
Request to order
Ram/Splitter Valve RR20T RR27T
Ram and splitter valve for the RR20T and RR27T. Range Road part RR2208.
$127.75
Request to order
Seal Kit for RR270 Ram
Seal kit for the RR270 ram. Range Road part RR2205.
$75.75
Request to order
Conveyor Rubber Drive Roller 6"
6" rubber conveyor roller. Range Road part RR2203.
$95.55
Request to order
RR2171 sightglass RR20T
Hydraulic fluid sight glass for the RR20T firewood processor. Part RR2171.
$7.65
Request to order
RR2153 Recoil 10hp RATO
Recoil starter for the 10 hp Rato engine. Range Road part RR2153.
$44.65
Request to order
RR2150 fitting for lubricator block
Fitting for the lubricator block. Range Road part RR2150.
$4.50
Request to order
RR2137 Battery Terminal Set
Battery terminal set — terminals only, no cable. Range Road part RR2137.
$7
Request to order
RR5049
Plastic sight for the depth-of-cut gauge. Fits all Range Road sawmills. Part RR5049.
$4.30
Request to order
RR2126 Conveyor Motor
Conveyor drive motor for Range Road firewood processors. Part RR2126.
$226.40
Request to order
RR5043 Stop Plate for sawmill rail
stop plate for sawmill rail
$4.70
Request to order
RR5528 Conveyor Belt for Edger
Conveyor belt for the Range Road RR5510 edger. Part RR5528.
$275.20
Request to order
RR2134 Manual Ram Actuator Arm
Manual ram actuator arm. Range Road part RR2134.
$39.20
Request to order
RR2272 Log Hold Down Spring EcoPro
Log hold-down spring for the EcoPro300 firewood processor. Part RR2272.
$4.70
Request to order
RR2140 Black Rubber Spyder
Black rubber spider coupling insert, L95. Range Road part RR2140.
$9.10
Request to order
Plastic Bale Wrap
Plastic wrap for the RRF940 bale wrapper — 25 cm (10") wide on a 7.5 cm (3") core. Part RRF956.
$100
Request to order
RR5042 Blade Guide Adjuster
Sold per each, per side required.
$50.40
Request to order
RR2300 3/8" .063 Chisel Chainsaw Chain
3/8" .063 chisel chainsaw chain — a 100 foot roll with master links, enough to make up chains for a whole season. Part RR2300.
$358
Request to order
Baler Twine
Jute twine for the RRF900 mini round baler. Range Road part RRF955.
$30
Request to order
166" x 1.5" x .042" Ripper37 Blades
Sawmill blades for our RR6032 60 Series 32" Sawmills Order a single blade, 3 pack, 5 pack or 10 pack.
$60
Request to order
Mount for Round Bar
Fits All Range Road Sawmills Sold as a set. (2)
$10.60
Request to order
RR5101 Sawmill Pulley
Range Road Sawmill Pulley. 18 5/8" OD - 473mm Fit 1" shaft Sold per each.
$120
Request to order
148" x 1.5" Sawmill Blades
Choosing your blade hook degree: 7° sawmill blades are a great choice when sawing harder lumber or frozen logs. 10° sawmill blades are the most popular choice as they are considered an all-p
$49
Request to order
Magnetic Scale
Large Magnetic Strip for Range Road Sawmills.
$10.60
Request to order
Replacement Belt
Replacement belt for RR502 Conveyor
$332.65
Request to order
Bar Chains
Oregon Chain Options: 18" Oregon Chain 72 Drive Links 20" Oregon Chain 76 Drive Links 20" Oregon Chain 78 Drive Links
$28.10
Request to order
RR2541 Chainsaw Hydraulic Bar Conversion Kit
Click Here For Full Product Information
$845
Request to order
Sawmill Belts
Belts for the RR50 series 22"–36" sawmills and the RR60 series 22"–26". Specify idler or drive when you order — they are not the same belt.
$20
Request to order
Ram Actuator Cable
Ram actuator cable for Range Road firewood processors.
$19.95
Request to order
Conveyor Belt
Conveyor Belt - Choose Width
$213.85
Request to order
RR5103 Sawmill Cover
Sawmill cover. One size fits all.
$75
Request to order
156.5" x 1.5" Sawmill Blades
156.5" x 1.5" x 0.42" Replacement Blade for Range Road RR5032 Sawmills
$51
Request to order
Sawmill Maintenance Kit
Sawmill maintenance kit for all Range Road sawmills . Includes: 1 idler belt 1 drive belt 4 blade guides 2 blade guide bearings 6200RZ 4 felts
$146
Request to order
RR2242 Roller Wheel
Drive Roller with chain sprocket. Drive Sprocket Body Width 388mm (15 5/16") Shaft Length 60mm (2 3/8") -Large end Shaft Length 44.5mm (1 3/8") -Sprocket side Shaft Diameter 25mm (1") Sprock
$118
Request to order
RR5048 Felts
Contains: 4 felts
$15.40
Request to order
RR2167 Coupler L90 1"
L90 coupler, 1". Range Road part RR2167.
$12.20
Request to order
RR2152 Recoil 13hp
Recoil starter for the 13 hp engine. Range Road part RR2152.
$27.15
Request to order
RR2131 Conveyor shutoff valve
Shutoff valve for the conveyor. Range Road part RR2131.
$72.35
Request to order
RR2192 1/2" coupler for log splitter
1/2" coupler for the log splitter. Range Road part RR2192.
$19.90
Request to order
T Bolt for Sawmill
T bolt for Range Road 50 series sawmills. Part R5053.
$9.50
Request to order
RR2156 Saw Arm Return Spring
Saw arm return spring for Range Road firewood processors. Part RR2156.
$12
Request to order
Chain Drive Sprocket
Choose your options. RR2144 - fits all models without case drain on saw motors RR2264 - fits EcoPro300B w/case drain on saw motor
$29.90
Request to order
Toe Board
Helps to keep cuts parallel with the grain & true to produce a better quality cut. Manually position and adjust height to level tapered logs.
$182.80
Request to order
CBN Sharpener Blade
CBN grinding stone for the RR5055 blade grinder, 15 cm diameter. Specify the degree you sharpen at when you order.
$231.75
Request to order
RR2141 hydraulic cap
Round plastic cap for the hydraulic tank. Range Road part RR2141.
$13.70
Request to order
Hand Winch for EcoPro
Hand winch for the EcoPro firewood processor. Range Road part RR2245.
$186.30
Request to order
RR407 Replacement Belt for RR403
Cogged V-Belt - sold individually Belt OD 44.75" Replacement belt for the RR403 Range Road Chipper
$17.50
Request to order
Wood Chipper Blades
Sold per set. Reversible.
$51.80
Request to order
RR2547 Saw Motor Upgrade Kit
Upgrade kit for Range Road fire wood processor motor. Choose swivel plate required to accompany kit.
$434.15
Request to order
RR2302 .325 .063 Chisel Chainsaw Chain
.325 .063 chisel chainsaw chain — a 100 foot roll with master links. Part RR2302.
$394.70
Request to order
RR2170 Hydraulic Oil Filler Assembly
Hydraulic Oil filler with screen and cap for all Range Road firewood processors
$34.30
Request to order
Adjustable Handle/Crank Kit
Lower the crank position on your Range Road Sawmill
$75
Request to order
RR2146 3/8" quick coupler set
3/8" quick coupler set, male and female. Range Road part RR2146.
$26.35
Request to order
RR5041 Blade Guide Bearing
RR5041 Blade Guide Bearing - Need 2.
$9.35
Request to order
RR5195 Sawmill Powerhead Kit
RR5195 Powerhead Assembly Kit. This kit replaces the manual crank. Raise and lower the sawmill head with the electric switch. Compatible with Range Road's 22", 26", 29", 32", 36" sawmills. I
$600
Request to order
Grizzly Bar for Conveyor
Upgrade your conveyor with our Grizzly kits! Shipping available within Canada Only.
$125
Request to order
RR2195 conveyor infeed shaft coupler
Coupler for the conveyor infeed shaft. Range Road part RR2195.
$13.45
Request to order
RR2178 2 speed vavle RR20T
Two-speed valve for the RR20T firewood processor. Part RR2178.
$96
Request to order
RR2139 Coupler L90 25mm
L90 engine coupler, 25 mm. Range Road part RR2139.
$12.25
Request to order
RRF985 Flail
Replacement flail for RRF920 disc mower 10.5cm (4") long 5cm (2") wide 2cm (3/4") hole
$32.50
Request to order
Drive Roller for 10" Conveyor
250 mm rubber drive roller for the 10" conveyor. Range Road part RR2259.
$113.50
Request to order
RR2236 Saw Arm Return Cylinder
EcoPro saw arm return cylinder.
$33.40
Request to order
RR2149 Chain Adjustment Block
Chain adjusting block for Range Road RR20T and early EcoPro firewood processors. Bar oil hose mounts to this block.
$38.15
Request to order
RR5053 T Handle for Sawmill
Fits 22"-36" Range Road Sawmills Sold as a pair.
$19
Request to order
EcoPro Conveyor Chain Conversion Kit
Convert your belt conveyor to chain. Contact a dealer to order. This kit is for the processors only and is not compatible with the RR502 Standalone Conveyor.
$377.85
Request to order
RR5400 BAHCO Blade Tension Gauge
Bahco Tension Meter for Bandsaw Blades Proper tension is necessary to provide straight cuts and long blade life, thereby reducing cost-per-cut. Easy to use. Designed for quick, easy, accurat
$339
Request to order
RR2170A Hydraulic Oil Filler Cap
Hydraulic Oil filler cap for all Range Road firewood processors
$14.50
Request to order
Fitting 1/2"M x 1/2"M 90°
1/2" male to 1/2" male 90° hydraulic fitting. Range Road part RR2196.
$10.50
Request to order
RR2187 Chain Adjustment Block - No Oil Hose
Chain adjusting block for Range Road EcoPro firewood processors. Bar oil hose mounts to the swivel plate NOT to this block.
$39
Request to order
RR3120 Firewood Bag
Our bags are meant for storing and transporting firewood. Simply slide the reinforced loops over your forklift forks and adjust your conveyor so your processed firewood goes directly into th
$25
Request to order
18" Chainsaw Bar
Options: 18" Range Road 18" Stihl
$23.50
Request to order
Edger Replacement Blade
Replacement Blade for RR5510 Edger Sold per each.
$66.95
Request to order
144" x 1.25" Sawmill Blades
Choosing your blade hook degree: 7° sawmill blades are a great choice when sawing harder lumber or frozen logs. 10° sawmill blades are the most popular choice as they are considered an all-p
$36.50
Request to order
RR5100 Grinding Replacement Stone
Replacement grinding discs for the Range Road Blade Sharpener . Sold per each.
$20
Request to order
RR5047 1/4" ball valve for sawmill
1/4" hose and valve for the sawmill water reservoir. Range Road part RR5047.
$14.80
Request to order
RR5135 Log Dog Only
Log dog only as pictured. fits 22"-36" Range Road Sawmills.
$51.85
Request to order
RR5046 Throttle lever & cable assembly
throttle w/cable assembly as shown
$21.90
Request to order
Hydraulic Pump Main EcoPro
Main hydraulic pump for the EcoPro firewood processor. Part RR2235.
$284
Request to order
RR5040 Blade Guide (Single guide - 4 used)
Contains: 1 blade guide (4 Used per Unit)
$12.05
Request to order
RR2160 Conveyor Bearing
Conveyor bearing, UCFL204. Range Road part RR2160.
$18
Request to order
RR412 Chipper Belt for RR430
belts sold individually.
$24.20
Request to order
CAN'T FIND THE PART?
Text us the machine model and what broke. We stock most Range Road and TMG wear parts and can special-order the rest.